Flammable 1993 Class 3 Decal
$2.95
Regular price $2.46Flammable 1993 Class 3 Decal
Ensure full compliance when transporting hazardous liquids with SafeTruck’s UN/NA 1993 (Diesel) Flammable Liquid Placards. Pre-printed with the correct UN number, these Hazard Class 3 placards satisfy all 49 CFR 172.500 requirements for domestic and international hazmat shipments by highway, rail, or water.
We prioritize your safety and regulatory adherence—from precise red ink and flame pictograms to exact wording and dimensions. Every detail meets DOT standards, giving you 100% confidence in a reliable, ready-to-use placard solution.
Features
- 10.75" wide x 10.75" high
- Red, White and Black Print
- 5-7 year premium grade vinyl material
- Die cut for precision
- Proudly designed and made in the USA
Package Includes
- One Flammable 1993 Class 3 Decal
- Size 10.75" X 10.75"
Installation Notes for Flammable 1993 Class 3 Decal
- Installation Materials (Not Included) - alcohol or soapy water, paper towels, squeegee, and needle
- Firstly clean surface with alcohol or soapy water and let dry. Apply with low humidity levels and outside temperatures over 65 degrees F are recommended for best results.
- After that, remove decal from backing and place on clean surface.
- In conclusion, if you notice air bubbles, use a squeegee to push most of them to the edge. If any bubbles remain, create a small hole in the decal with a cutter or pin to release the air. Then, gently push out the remaining air with your fingertips.
- Above all, the full cure time for the decal is between 2 to 3 days.
Contact us if you have any questions or if you are looking for a custom design. Check out the rest of the line of our Placard Safety Decals.
$2.95
Regular price $2.46Flammable 1993 Class 3 Decal
Ensure full compliance when transporting hazardous liquids with SafeTruck’s UN/NA 1993 (Diesel) Flammable Liquid Placards. Pre-printed with the correct UN number, these Hazard Class 3 placards satisfy all 49 CFR 172.500 requirements for domestic and international hazmat shipments by highway, rail, or water.
We prioritize your safety and regulatory adherence—from precise red ink and flame pictograms to exact wording and dimensions. Every detail meets DOT standards, giving you 100% confidence in a reliable, ready-to-use placard solution.
Features
- 10.75" wide x 10.75" high
- Red, White and Black Print
- 5-7 year premium grade vinyl material
- Die cut for precision
- Proudly designed and made in the USA
Package Includes
- One Flammable 1993 Class 3 Decal
- Size 10.75" X 10.75"
Installation Notes for Flammable 1993 Class 3 Decal
- Installation Materials (Not Included) - alcohol or soapy water, paper towels, squeegee, and needle
- Firstly clean surface with alcohol or soapy water and let dry. Apply with low humidity levels and outside temperatures over 65 degrees F are recommended for best results.
- After that, remove decal from backing and place on clean surface.
- In conclusion, if you notice air bubbles, use a squeegee to push most of them to the edge. If any bubbles remain, create a small hole in the decal with a cutter or pin to release the air. Then, gently push out the remaining air with your fingertips.
- Above all, the full cure time for the decal is between 2 to 3 days.
Contact us if you have any questions or if you are looking for a custom design. Check out the rest of the line of our Placard Safety Decals.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov